For Purchase Instore Only
No need to mess around in the rain pulling a tight fitting cover down over your scooter. Simply drive up beside the Hidey Hood 90, unhook and drop it down – your scooter is under cover instantly.
Fixes to a wall or fence as low as 115cm (45″)
Quick and easy to assemble – multiple fixing points keep it in place
The universal scooter storage solution, fits most models
Designed to be easy to use
Folds neatly up against the wall when not in use
Unique dome shape allows rain to simply run off
Integral awning to prevent rain pooling in the pleats when folded back
Elasticated loops & eyelets for pegging down
Strong, light & flexible fibreglass framework
Height 1.67m (67″). Width 2.5m (98″). Depth 1.67m (67″).
Fixing kit included – screws, wall plugs, guylines and pegs (stakes)
Manufactured using a tough Polyurethane (PU) coated 210D Oxford polyester fabric with a hydrostatic head of 1500mm
Retail/Mail order packaged – weighs approx 4kg (9lb): pack dimensions 51 cm (20″) x 31cm (12″) x 8cm (3″)
Here’s another “I wish I’d thought of it” product. The Hidey Hood 90 complements the innovative range of outdoor storage solutions from Cave Innovations. The motivation behind our HideyHood 90º mobility scooter cover was to provide a cost effective and easy to use outside storage solution for mobilty scooters. As the list of possible models grew so did the product… literally.
The HideyHood 90º now stands 1.67 metres high, the same front to back and 2.5 metres wide. It’s great value, straight forward to assemble, easy to open or close and extraordinarily versatile. We have yet to find a scooter it won’t accommodate. We’re actually finding that people are buying the HideyHood 90 not only for sheltering and storing mobility scooters but also all sorts of other items such as bikes, motorbikes, BBQs, patio furniture …
You can use the integral rain awning to help hold it up, out of the way and prevent rain building up in the folds. This saves you from a soaking when you close your HideyHood ® after a rainstorm.
Quick and easy to assemble. Just slide the five fibreglass poles through the sleeves and insert them into the eyelets at either end. The eyelets around the outer edge secure your HideyHood® 90º to the fence, wall or shed. The clever rear windblock panel, with it’s five brass fixing eyelets, allows you to use a Hideyhood® 90º on fences or walls as low as 115cm (45″). Wall plugs and screws are included. Installation is quite possible for one person, but far easier with two… because they’re bigger than you think! This clever mobility scooter cover can be packed away in just a couple of minutes when not required and you can take it with you when you move. Try that with a shed!
The Hidey Hood 90 mobility scooter cover has big smooth curves, which encourage rain and snow to just run off. The front simply lifts up to provide full, instant access. Toggle and loop straps let you fix it, out of the way when not in use. There are seven pegging loops, so if you site your HideyHood® 90º on soft ground, you can use the pegs provided to fix it down. One of the most common questions we’re asked is does the wind tend to lift it up, if I choose not to anchor it down. The answer is, no it doesn’t. You’ll find that generally even in quite high winds it stays down. It might move a little from side to side but it stays down. Many people choose to install their Hidey Hood 90 on hardstanding, on their drive or on their patio.
Concerned about security? For additional peace of mind you might want to consider the optional Anka Point security bracket. Fix your Anka Point to the wall with the special “one way” anti-theft security screws provided and use a chain or bike lock to keep your scooter safe inside your HideyHood® 90º
HideyHood 90 Folding Mobility Scooter Cover Specifications
HideyHood® 90º is manufactured using a tough Polyurethane (PU) coated 210D Oxford polyester fabric with a hydrostatic head of 1500mm. PU tape on all the seams helps keep out the rain. The poles are supplied interconnected with elastic. They’re made of strong, light and flexible fibreglass.
Dimensions when assembled:
Width: 250cm (98″)
Height: 167cm (67″)
Depth: 167cm (67″)
You’ll be amazed how small this product is when packaged. The Hideyhood® 90º is supplied in attractive, full colour retal/mail order packaging. Extremely easy and cheap to transport and erect compared to a traditional, wooden garden shed.
Pack size just 51cm (20″) x 31cm (12″) x 8cm (3″). Weight: 4kg (9lbs) – (approx.)
Please note we also sell a larger version of this product which is free-standing and twice the size, known as the Hideyhood 180
Hidey Hood & HideyHood are registered trade marks.
The HideyHood 90 is protected by European Community design registration and US Design Patent.
International patents & design registration applied for.